Qortal Project

The future of blockchain platforms

User Tools

Site Tools


raspberry_pi_4

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
raspberry_pi_4 [01/04/2022 16:02] gisele_hraspberry_pi_4 [03/20/2024 21:07] (current) hfactor
Line 5: Line 5:
 {{::b0f7a9cb-3134-4ca3-87bc-9573e1b807cc.jpeg?400|}} {{::b0f7a9cb-3134-4ca3-87bc-9573e1b807cc.jpeg?400|}}
  
-**Please notethis guide is for building your own Raspberry Pi from scratch with a BrooklynR OS.  For those who have purchased a QORTector from www.crowetic.com please go to [[QORTector Walkthrough]]**+Last updatedFeb 23, 2024
  
-===== BrooklynR Kernel Features =====+**Please note:** after setting up your computer as a node, be sure to review the [[Port Forwarding]] guide to ensure your node functions optimally.  
 + 
 +Build your own QORTector or buy one pre-built at https://crowetic.com! **Please note: this guide is for building your own Raspberry Pi from scratch with a BrooklynR OS.  For those who have purchased a QORTector from https://crowetic.com please go to [[QORTector Walkthrough]]**
  
-  - OS based on Debian Linux, Raspbian 10 buster 
-  - Fully open source 
-  - Customized specifically for Qortal 
-  - Optimized performance and a must-have! 
-  - Hardened Kernel security. No more local exploits 
-  - Locked the memory copy b/w internal and external memory devices 
-  - Added Entropy hardware for maxed out entropy. Far more than an i7 Processor 
-  - Thermal control. Yes you can add fans and they will auto start when the temp hits 51C 
-  - SPH implementation of crypto functions 
-  - Updated crypto algorithms 
-  - Full SoC encryption enabled on board the CPU for UI and Core speedup 
-  - Overclocking assist now supported on 4B rev 1.2 and above 
-  - 32 is enabled by default. You will not need 64 bit 
-  
-These releases can guarantee uptime of years without a single reboot or stall. No one will ever need to reboot a Pi 4 anymore, provided you use the recommended power bricks. Users have option of Headless releases or with a full featured accelerated Desktop GUI Release: QortalOS Sinclair Mate, QortalOS NXT LXQT, QortalOS NXT GNOME, Plasma, Plumbus, XFCE, Cinnamon, or Russcade. 
  
 ===== Raspberry Pi 4 Configuration Recommendations===== ===== Raspberry Pi 4 Configuration Recommendations=====
Line 32: Line 19:
   * USB 3.0 SSD 500GB or above (128GB microSD will work but SSD is recommended)   * USB 3.0 SSD 500GB or above (128GB microSD will work but SSD is recommended)
  
-Note: a few of the releases below will run on Pi 3B+ models.   
  
-===== Preparations =====+===== Preparations on your PC/Desktop computer =====
  
-  -  Download SD Memory card formatter(if using SD): [[https://www.sdcard.org/downloads/formatter| Select OS on site]] + 
-  -  Download Balenaetcher (to flash image on SD and SSD) : [[https://www.balena.io/etcher| Select OS on site]]+  -  To flash image on SSD and SD, download Balenaetcher : [[https://www.balena.io/etcher| Select OS on site]] / or for Windows only - another option - win32diskimager: https://sourceforge.net/projects/win32diskimager/ 
 +  -  Only if using SD card (not recommended), download SD Memory card formatter: [[https://www.sdcard.org/downloads/formatter| Select OS on site]] 
   - Download 7-zip (to unpack the image) : [[https://www.7-zip.org/a/7z1900-x64.exe|Windows (64bits)]] , [[https://www.7-zip.org/a/7z1900.exe|Windows (32bits)]]   - Download 7-zip (to unpack the image) : [[https://www.7-zip.org/a/7z1900-x64.exe|Windows (64bits)]] , [[https://www.7-zip.org/a/7z1900.exe|Windows (32bits)]]
   - For Mac users download Keka(to unpack the image) : [[https://d.keka.io|macOS]]   - For Mac users download Keka(to unpack the image) : [[https://d.keka.io|macOS]]
-  - Download Remote desktop client to access PI from your MAC or Windows computer (used for Desktop GUI images): [[https://docs.microsoft.com/en-us/windows-server/remote/remote-desktop-services/clients/remote-desktop-clients| Select OS on site]]   +  - Download Remote desktop client to access PI from your MAC or Windows computer (used for Desktop GUI images)OPTIONAL can use SSH: [[https://docs.microsoft.com/en-us/windows-server/remote/remote-desktop-services/clients/remote-desktop-clients| Select OS on site]]   
-  - Download Brooklyn R kernel on your computer (Pick only **ONE** below):  +  - Download latest supported image on your computer in preparation to flash on ssd of pi4
-  * [[https://cloud.qortal.org/s/HaBACo24DJZ5kk2| QortalOS NXT Sinclair Mate Desktop]] (MATE Desktop customized, for all Raspberry Pi 4 models and 3B+, for novice to expert users as it can be run headless or via GUI, includes custom theme  dark mode, Qortal core & UI)   +     
-  * Jason’s customized Plumbus image (best option for simplicity - required 128gb + and updating Qortal core & UI): https://cloud.qortal.org/s/Ttg6TgDGooj68bp  +===== How To Install QortalOS and Qortal Core =====
-  * Jason’s customized NXT image (requires updating Qortal core and UI): https://cloud.qortal.org/s/Dpz8Ce7JBxMDS6L +
-  * [[https://cloud.qortal.org/s/HzyASe4fJbLTQsm| QortalOS NXT Sinclair Headless (CLI only)]] ( medium to expert level users, 4gb expanded, all Raspberry Pi 4 models and 3B+,True mempow implementation for lag free crunching) +
-  * [[https://cloud.qortal.org/s/gzLtPGaRNBNeeJB| QortalOS NXT Headless (CLI only)]] (medium to expert level users, excellent throughput on Qortal web hosting ,sync & relay) +
-  * [[https://cloud.qortal.org/s/2f86Zt5kBbwnco3|Jaymen Headless (CLI only)]] (Advanced users without the Desktop environment)  +
-  * [[https://cloud.qortal.org/s/QNNGyy98HKTeNBb|QortalOS NXT Vermouth Desktop]] (LXQT Desktop, Includes daily use software for productivity and communication) +
-  * [[https://cloud.qortal.org/s/6XFN2oe7nReCNZ3|QortalOS NXT Beluga Desktop]] (GNOME Desktop, Built for plug and play use, Only accessible via SSH and RDP) +
-  * [[https://cloud.crowetic.com/s/6Rq9DcSWfeeLwgG|Plasma Desktop]] (aka KDE, image with a perfect blend of beauty and performance, Recommended for 8GB Pi model with USB3 boot enabled) +
-  * [[https://cloud.crowetic.com/s/9BPBQn92r2zz9nf|Plumbus Desktop]] (QORTector version, MATE and LXDE integration, most responsive desktop environment)  +
-  * [[https://cloud.crowetic.com/s/7nJkZrEGJTjXW2K|XFCE Desktop]] (XFCE Desktop, Suitable for 4 GB and 8GB Raspberry Pi variants)  +
-  * [[https://cloud.crowetic.com/s/HgnZt8KDATm8q35|Cinnamon Desktop]] (Not suitable for microSD cards or 4GB Pi variants, no RDP) +
-  * [[https://cloud.qortal.org/s/WAwsyqT7gBXnDML|Russcade Desktop]] (able to run the core while gaming, aukey 65w power supply and Power Delivery cable highly recommended) +
- +
-See each Brooklyn Release details following installation instructions (a summary of what is in https://github.com/Qortal/Brooklyn/releases) +
- +
-===== How To Install Qortal Core =====+
  
-  - Format SD card with FAT32/FATX using SD Memory Card Formatter on your computer (if using an SD card) +  - only for SD card, Format SD card with FAT32/FATX using SD Memory Card Formatter on your computer 
-  - Use 7-zip on your computer to extract the downloaded image, you will get a file with **Disc icon** (circling in picture){{::1.png?400|}} +  - Use 7-zip or Keka on your computer to extract the downloaded image, you will get a file with **Disc icon** (circling in picture){{::1.png?400|}} 
-  - Connect your microSD card or SSD drive to your computer for flashing the unpacked image  +  - Connect your SSD drive or sd card to your computer to usb port for flashing the unpacked image  
-  - Open Balenaetcher on your computer, insert your microSD card or SSD drive, select the image you extracted and microSD card or SSD drive, click ‘flash’! {{::2.png?400|}} +  - Open Balena etcher on your computer, select the image you extracted, select SSD drive or microSD card , click ‘flash’! {{::2.png?400|}} 
-  - Once it finishes flashing the image, disconnect from computer the microSD or SSD then plug into to Pi, connect Pi to router via ethernet cable (recommended) and power on the Pi. (It needs some time to start up.) +  - Once it finishes flashing the image, disconnect from computer the SSD or microSD card plug into to Pi, connect Pi to router via ethernet cable (recommended) and power on the Pi. 
-  - Power on the Pi and wait a few minutes to start. In the mean time, log into your router to locate the IP address of your Pi to be able to RDP into PI via computer. Always good idea to check that your PI is now listed in your connected devices. This is even if you are using a monitor, keyboard, and mouse where RDP is not needed.+  - Power on the Pi and wait a few minutes to start. In the meantime, log into your router to locate the IP address of your Pi for SSH or use of remote desktop to access PI via computer. Always good idea to check that your PI is now listed in your connected devices. This is even if you are using a monitor, keyboard, and mouse where RDP is not needed.
   - If you are going headless (using a different computer to log into the Pi desktop) then on Windows/Mac/Linux open up Remote Desktop Connection (Microsoft Remote Desktop Client or Remmina for Linux)   - If you are going headless (using a different computer to log into the Pi desktop) then on Windows/Mac/Linux open up Remote Desktop Connection (Microsoft Remote Desktop Client or Remmina for Linux)
   - Enter the IP for your Pi and click ‘connect’. Click ‘yes’ when it asks about connecting and if you trust the certificates.   - Enter the IP for your Pi and click ‘connect’. Click ‘yes’ when it asks about connecting and if you trust the certificates.
-  - Log in. Username: pi Password: dmax911e +  - Log in. Username: pi Password: dmax911e  
-  - Once Desktop loads you will need to Expand the the filesystem: Open a terminal session, enter this command and press enter:<code>sudo raspi-config </code>  +  - Once Desktop loads you Open a terminal session to Expand the the filesystem: <code>sudo raspi-config </code> 
-  - Raspi-config screens will pop up. Scroll down to advanced settings using arrow keys, hit enter, select expand file system and select it. When it is done select ‘exit’ and it will ask for you to reboot. Click ‘yes’.+  - Raspi-config screens will pop up. Scroll down to advanced settings using arrow keys, hit enter, select expand file system and select it. When it is done select ‘exit’ and it will ask for you to reboot. Click ‘yes’
   - Log in again. Username: pi Password: dmax911e   - Log in again. Username: pi Password: dmax911e
-  - Open a terminal session and input the commands below (enter/return after each line wait for response):+  - Open a terminal session to update system/apps(copy and paste as is command below):<code>sudo apt update && sudo apt -y upgrade</code> 
 +  - once done system/apps update, download, extract and run latest core with this one command in terminal (copy and paste as is command below): 
 +<code>wget https://github.com/Qortal/qortal/releases/latest/download/qortal.zip && unzip qortal.zip && cd qortal && chmod +x *.sh && ./start.sh</code> 
 +You will see qortal logo and bootstrap process, let it run and then the core will sync up with the chain. 
  
-Download latest version of Qortal core: (this is optional. Needed only if the image you chose was released/packaged more than 1 month ago and if the core was packaged.)+ =====How to Install Qortal UI via scripts with associated UI launcher =====
  
-First check if the core is present and remove Qortal directory before downloading new version):  +Type in Terminal session (press return after each command):  
-<code>ls +<code>cd
-rm -R qortal</code>              +
  
-Then download latest Qortal core+wget https://raw.githubusercontent.com/xspektrex/QORTectorScripts/master/uninstall_ui.sh
  
-<code>wget https://github.com/Qortal/qortal/releases/latest/download/qortal.zip+wget https://raw.githubusercontent.com/xspektrex/QORTectorScripts/master/update_install_ui.sh
  
-unzip qortal.zip</code>+wget https://raw.githubusercontent.com/xspektrex/QORTectorScripts/master/launch_UI.sh ((move to desktop via GUI file manager)
  
-Start the core(Qortal core will auto-bootstrap then sync up.  If it looks like the image below, that means your core is running now.) +Make the script/s executable:
-<code>cd qortal+
  
-chmod +x *.sh+via terminal, immediately after terminal load, with chmod +x *.sh
  
-./start.sh</code> +Via GUI with (Right-click -> Properties -Permissions) and check the "make executable" box.
-{{:3.png?400|}}+
  
-=====How to Install Qortal UI=====+Cut/paste UI launcher from home to desktop( via GUI file Manager)
  
-Type in Terminal (Press the Enter key after each command) +Now run the update_install or uninstall script/s via terminal:
-<code>cd+
  
-wget https://raw.githubusercontent.com/crowetic/QORTector-scripts/main/update-qortal-ui.sh+sudo ./uninstall_ui.sh 
 +(optional this will enable a clean install, recommended first time after flashing a new image) 
 + 
 +sudo ./update_install_ui.sh 
 +(when you see the line "Build Complete, You can use your new UI" its done)</code> 
 + 
 +=====How to Run Qortal UI via UI launcher===== 
 + 
 +Launch the Qortal UI via the UI launcher, double click on the icon on desktop 
 + 
 +For more info on these scripts developed by Hfactor visit: https://github.com/xspektrex/QORTectorScripts 
 +=====How to install and Run new Qortal UI app image===== 
 + 
 +In terminal session, you will download the Raspberry Pi Qortal UI (arm64 64bit .AppImage) - Qortal UI: 
 + 
 +<code>cd
  
-chmod +x update-qortal-ui.sh+cd Desktop
  
-./update-qortal-ui.sh</code>+wget https://github.com/Qortal/qortal-ui/releases/latest/download/Qortal-Setup-arm64.AppImage</code>
  
-=====How to Run Qortal UI=====+once completed in terminal, go to the Desktop and update the file called Qortal-Setup-arm64.appimage as follows:
  
-Type in Terminal (Press the Enter key after each command):  +<code>Right Click on file called Qortal-Setup-arm64.appimage, choose Properties
-<code>cd UI+
  
-cd qortal-ui+First tab change name to Qortal-UI
  
-yarn run server & </code>+Select Permissions tab, tick Allow executing file as program, then close
  
-Then go to web browser Chromium. Type localhost:12388 (Qortal UI Login will pop up) +Double click on the Qortal-UI file and the Qortal UI login will appear. 
 +</code>
  
 Note: For Headless images, you will access your pi via ssh from your computer. Note: For Headless images, you will access your pi via ssh from your computer.
Line 128: Line 114:
 This walkthrough will illustrate using Microsoft Remote Desktop client on a Mac laptop (see in ‘Preparations’ section above where to download the client for your computer OS): This walkthrough will illustrate using Microsoft Remote Desktop client on a Mac laptop (see in ‘Preparations’ section above where to download the client for your computer OS):
  
-1. Click on 'Add PC' and define the connection for Pi sinclairMATE, in this example shows connecting via ip address located earlier from the connected devices in our router/modem. Another option would be via hostname: sinclairmate.local (just replace the 'sinclairmate' portion with whatever version your device is - such as 'plumbus' for QORTector customers). +1. Click on 'Add PC' and define the connection for Pi TITAN, in this example shows connecting via ip address located earlier from the connected devices in our router/modem. Another option would be via hostname: titan.local (just replace the 'titan' portion with whatever version your device is - such as 'plumbus' for QORTector customers). 
-{{:rdp_pi_screen_shot1-2021-12-28.png?600|}}+{{:screen_shot_titan1_2022-03-14_at_6.42.54_pm.png?600}}
  
-2. Double click on RDP connection for sinclairMATE just created and enter +2. Double click on RDP connection for TITAN PLasma just created and enter 
 Username: pi  Username: pi 
-Password: dmax911e  +Password: dmax911e 
-{{:rdp_pi_screen_shot2_2021-12-28.png?600|}}+  
 +{{:screen_shot_titan2_2022-03-14_at_6.44.53_pm.png?600|}} 
 + 
 +3. Pi desktop GUI is now fully available: 
 +{{:screen_shot_titan3_2022-03-14_at_7.05.08_pm.png?600|}} 
 + 
 + 
 +===== Trusted Community Releases by Date ===== 
 +====RaspiPHENIX for Pi4====  
 +//Release Date: Dec 8, 2023//\\ //Released by: HFactor//\\ //Repository: Qortal cloud Private Data Server//   
 + 
 +===Release Details===  
 +  * Debian 12 Bookworm on 6.1.0-rpi7-rpi-v8 kernel 
 +  * Safely overclocked to 1.8Ghz 
 +  * Software/Kernel follow mainline Debian release/s 
 +  * Use with or without GUI (Headless) 
 +  * MATE 1.24.1-2 desktop with custom dark UI 
 +  * Custom Honeycomb screensaver 
 +  * RDP and VNC capable 
 +  * Custom SSH login with wifi/bluetooth indicators 
 +  * Custom RDP login screen 
 +  * Preinstalled UI built from source (V4.42 (will need to run updates to use)) 
 +  * Preinstalled QORTAL tools (qort tool and peer-heights) 
 +  * Plethora of additional software such as: 
 +    * Chromium with hardware acceleration and security/anonymity minded plugins 
 +    * VLC Player 
 +    * Libre Office 
 +    * System monitors (TOP, ATOP, HTOP and Glances) 
 +    * System info tools (Neofetch, Screenfetch, Duf (drive space)) 
 +    * Diodon clipboard manager 
 +    * Mate tweak, terminal, disk usage analyzer, system monitor, control center and disk utility 
 + 
 +===Release Creds=== 
 +  * Username: pi 
 +  * Password: dmax911e (please change via GUI or SSH)  
 +=== After flashing please perform the following steps (Immediately after terminal load): === 
 + 
 +  * **Expand filesystem:** 
 +    * <code>sudo raspi-config (Advanced -> Expand Filesystem)</code> 
 +  * **Update System/Apps:** 
 +    * <code>apt update && sudo apt -y upgrade</code> 
 +  * **Download/Extract/Run core:** 
 +    * <code> https://github.com/Qortal/qortal/releases/latest/download/qortal.zip && unzip qortal.zip && cd qortal && chmod +x *.sh && ./start.sh</code> 
 +  * **Exit Terminal** 
 +    *<code>Exit</code>   
 + 
 + 
 +=== After the above updates and core install please perform (Immediately after terminal load): === 
 +  * **Update Built From Source UI Via HFactor Script (If not using AppImage)** 
 +    * <code> ./update_install_ui.sh</code>   
 +      * **Uninstall Built From Source UI Via HFactor Script also included (If using AppImage)** 
 +        * <code>./uninstall_ui.sh</code>   
 +  * **Exit Terminal** 
 +    *<code>Exit</code>   
 +=== Downloads === 
 + 
 +^IMG  |  https://cloud.qortal.org/s/5s2tTcZiXJFz2wY 
 +^MD5  |  5e66874b43e32e4f989920ae75881f86 
 + 
 +=== Donations === 
 +^ QORT  | QY4LMuyTwJHiXFKG3hYvgnHXdpL1zPKxce 
 +^ LTC   | LhKBwsjtG2GdcFQdbQW8uA8Zpoqh6eKAxc 
 + 
 +---- 
 +     
 + 
 +==== QortalOS - TorchieMATE - 64bit - 16GB and 32GB QORTector versions==== 
 +(Release Date: Sept 16, 2022) 
 +Repository: Qortal/Brooklyn · Tag: 3.0.1 · Released by: Crowetic 
 + 
 +This release is packed with 'Torchie' that is built for the upcoming memPoW release of Qortal that will eventually be built into consensus. 
 + 
 +It is also a fUll GUI version, built for the QORTectors. 
 + 
 +Please NOTE - due to the tremendous amount of work that went into the customization on the 'pi' user, the decision was made to leave it as 'pi' for this release. You may have noticed the headless version has a 'qortal' user. 
 + 
 +For this release, the username/password defaults are: 
 + 
 +Username - pi 
 +Password - dmax911e 
 + 
 +Just like the previous NXT releases, etc... In the future I may re-work it so that the user will be 'qortal' like it is on the headless, but there are a TON of customisations to the pi account, so leaving it for now. 
 + 
 +This version is FULL 64bit (ARM64) just like its headless predecessor, therefore supports ARRR. 
 + 
 +All of the details from the headless release below regarding the kernel and its improvements, also apply to this release. 
 + 
 +This release also includes a customised GUI done by HFactor, and some added modifications by crowetic and Scare Crowe for ease of use and performance and debugging. 
 + 
 +*The 16GB version does NOT include the Qortal db or the auto-start feature - The 16GB version comes with a link on the desktop to Start the Qortal Core, simply double-click it and click 'run'. If you WOULD like to enable the auto-start, you can simply use crontab -e and remove the '#' in front of the line that says @reboot ./start-qortal-at-boot.sh - this will start the core in the background just like the QORTector version does. You can also use the 'startup applications' tool to create a startup method that will start with the GUI, but this will only work if you have a monitor attached. 
 + 
 +*The 32GB version DOES include a copy of the Qortal db, and auto-start feature - Remember, that with the 32GB version the Qortal Core STARTS AUTOMATICALLY and RUNS IN THE BACKGROUND. This means you do NOT have to start the Qortal Core, you simply start the device and the Qortal Core starts automatically. 
 + 
 +This release has been tested on both 4GB and 8GB Raspberry Pi devices, and is currently undergoing more in-depth testing of the memPoW on the 4GB pi. Results of the longer testing of the memPoW on the 4GB pi will be made available to the Qortal community upon completion. 
 + 
 +Direct Download: https://cloud.qortal.org/s/torchieMATE-final-May-30-2023/download/Qortal-OS-TorchieMATE-QORTector-FINAL-May-30-2023-UPDATE.7z 
 + 
 + 
 +==== QortalOS v3.0.0 - 'Torchie' - 64bit - Headless Release ==== 
 +(Release Date: Sept 13, 2022) 
 + 
 +Repository: Qortal/Brooklyn · Tag: 3.0 · Released by: Crowetic 
 + 
 +QortalOS v3.0.0 'Torchie' headless 64bit - with customizations for Qortal MemPoW 
 + 
 +PLEASE NOTE - THIS IS A HEADLESS (NO GUI) RELEASE - The GUI release will be made hopefully within the next day or so. 
 +** Username is now "qortal" as default with generic password "dmax911e" ** 
 + 
 +This release is a total re-write of the code with 361,531 additions and 199,814 deletions as well as 124,068 additions and 87,873 deletions! Also including: 
 + 
 + Kernel 6.0.11 for Qortal with mempow hard crunch handling. 
 + 
 + Standard kernel will not be able to handle upcoming mempow hence this is released. 
 +   
 + This build is optimized for the core version 3.3.x and onwards. Welcome abroad DigiByte, Raven and ARRR. 
 +   
 + The entire system is now arm64 instead of previous hard float 64 release (kern,userspace) for ARRR chain support. 
 +   
 + Re-written DRM with crypto advantage for Qortal Core. 
 +   
 + Mass staging tree update starting 6.0.00-rc1. 
 + 
 +Direct Download: https://cloud.qortal.org/s/44cpmEYg39a8w9Z 
 + 
 + 
 +===== Retired/Deprecated Releases by Date ===== 
 + 
 +==== Brooklyn-NXT-TitanPLUS-QORTector-32GB-5.12.2022 ==== 
 + 
 +(Release Date: May 12, 2022) 
 + 
 +Repository: Qortal/Brooklyn · Tag: 1.3 · Released by: Crowetic 
 + 
 +Hello again Qortians, it's time for another release of the TITAN! 
 + 
 +It is my pleasure to take over the releases of this amazing development while Scare Crowe is in Ukraine. (He is of course the one still doing the development, I wish I was that good...heh. But I will be handling the releases.) 
 + 
 +This is the newest QORTector image that will be used on all of the QORTectors sold by Crowetic Hardware Development LLC (https://crowetic.com) including the new 'QORTector-KB' that will be going up on the website shortly. 
 + 
 +This image still uses MATE desktop environement as it has been continually proven to be the best performing desktop environment for the pi4. We will likely continue using MATE desktop for the foreseeable future. 
 + 
 +This image is setup to start Qortal Core automatically upon boot, and run in the background, this means you will NOT see the Qortal icon on the taskbar unless you stop and start Qortal, or change it to use a .desktop startup file. 
 + 
 +The image also comes with a pre-installed bootstrap and version 3.3.0 of the Qortal Core. This makes the image 32GB minimum size, so you will need at least 40GB of free space on the computer you plan to image from, and you'll need at least a 32GB disk to image to. 
 + 
 +I will also release a 16GB version of this image soon. Hope you enjoy the new titanPLUS image! 
 + 
 +This one includes the following improvements, and more... 
 + 
 +1. Real-time page scan and allocation 
 +2. Cache compression 
 +3. Real-time IRQ checks 
 +4. Dynamic I/O allocation for Java heap 
 +5. Java page migration 
 +6. Contiguous memory allocation 
 +7. Idle pages tracking 
 +8. Per CPU RAM usage tracking 
 +9. ARM NEON scalar multiplication library 
 +10. NEON/ARMv8 crypto extensions 
 +11. NEON SHA, Blake, RIPEMD crypto extensions 
 +12. Parallel NEON crypto engine for multi-algo based CPU stress reduction 
 + 
 +Grab it from: Retired 
 + 
 + 
 +==== QortalOS NXT TitanMATE Desktop ==== 
 +(Release Date: Mar 24, 2022) 
 + 
 +Repository: Qortal/Brooklyn · Tag: 2.0 · Released by: Crowetic 
 + 
 +This is the 16gb image of QortalOS NXT titanMATE by Scare Crowe. 
 +Due to a few complaints about video performance on titan-plasma... he took titan to a whole new level! 
 + 
 +Introducing... titanMATE! This one has hardware accelerated video performance, and MATE desktop environment, which is much less resource intensive, and performs a lot better. 
 + 
 +This image is totally suitable as a 'desktop replacement' as it can stream HD video full screen with no issues. (Just don't expect to be able to play new games on a pi 4.) 
 + 
 +There will be another version released shortly, the 'QORTector' version, which has only a couple differences... Qortal core starts automatically (which you can make this image do by adding @reboot ./start-qortal-at-boot.sh into crontab -e) and has a copy of the Qortal db on the image. 
 + 
 +This image does not have the Qortal db, and the auto-start is currently disabled. Feel free to enable it if you like. This image has a start script on the desktop for the Qortal Core, as well as the UI appimage pre-installed. Enjoy! 
 + 
 +Grab it from: Retired 
 + 
 + 
 +==== QortalOS NXT TITAN Plasma Desktop ==== 
 +(Release Date: Mar 17, 2022) 
 + 
 +Repository: Qortal/Brooklyn · Tag: 1.2.8 · Released by: Crowetic 
 + 
 +This is the 32GB QORTector image of QortalOS NXT TITAN by Scare Crowe. An update to the 1.2.7 image to fix audio and bluetooth issues. 
 + 
 +Also has updated Qortal and Qortal UI versions, and a new bootstrap. 
 + 
 +Grab it from: Retired 
 + 
 +(Release Date: Mar 8, 2022) 
 + 
 +Repository: Qortal/Brooklyn · Tag: 1.2.7 · Released by: Crowetic 
 + 
 +This is the 32GB QORTector image of QortalOS NXT TITAN by Scare Crowe. 
 + 
 +This image is built specifically for the QORTector devices, the only differences are that this image has a copy of the newest db for Qortal, and is setup to start the Qortal Core automatically. 
 + 
 +You can remove the auto-start if you like by simply running crontab -e and commenting out the @reboot line there. 
 + 
 +There will be another release done shortly that will be a 16GB+ version without the Qortal db. 
  
-3. Pi sinclairMATE desktop will display and enter Passworddmax911e  +Grab it fromRetired
-{{:rdp_pi_screen_shot3_2021-12-28.png?600|}}+
  
-4Pi desktop GUI is now fully available: +Brooklyn Titan LTS 5.60.12 nextgen uses ARM Turbo Clocks 
-{{:rdp_pi_screen_shot4_2021-12-29.png?600|}}+Optimised for Plasma(KDE) on Titan with line replication and interpolation.
  
 +TLS, AES, UI's Ripemd 128/160/320 NEON accelerated crypto functions are built inside kernel and not as loadable modules separately.
  
-===== Brooklyn Release Details (by release dates): ===== 
  
-====QortalOS NXT Sinclair Mate Desktop==== +==== QortalOS NXT Sinclair Mate-V2 Desktop ==== 
-(Release Date: Dec 28, 2021)+(Release Date: V1 Dec 28, 2021, V2 Jan 16, 2022 )
  
-Repository: Qortal/Brooklyn · Tag: 1.2.5 · Released by: Hfactor+Repository: Qortal/Brooklyn · Tag: 1.2.5 · Released by: HFactor
  
 OS: Raspbian 10 buster with BrooklynR NXT Sinclair+ kernel OS: Raspbian 10 buster with BrooklynR NXT Sinclair+ kernel
Line 154: Line 344:
  
 Suitable for all Raspberry Pi 3B+ and 4 models.  Designed and aimed for novice to expert users as it can be run headless or via GUI. Suitable for all Raspberry Pi 3B+ and 4 models.  Designed and aimed for novice to expert users as it can be run headless or via GUI.
-Qortal Core 2.1.and UI 1.6.prebuilt and included. +Qortal Core 3.0.and UI 1.7.prebuilt and included. Tools updated with apikey required.  
-Grab it from https://cloud.qortal.org/s/HaBACo24DJZ5kk2+This release is no longer availableBeen replaced with new version QortalOS NXT TitanMATE Desktop.
  
 Includes all the goodies/optimizations of the previous QortalOS NXT Sinclair Headless release with fully implemented GUI. Includes all the goodies/optimizations of the previous QortalOS NXT Sinclair Headless release with fully implemented GUI.
Line 178: Line 368:
 the men behind the Qortal vision (Jason, CAL, CAT and GFactor). the men behind the Qortal vision (Jason, CAL, CAT and GFactor).
  
-====QortalOS NXT Sinclair Headless====+Grab it from: Retired 
 + 
 + 
 +==== QortalOS NXT Sinclair Headless ====
 (Release Date: Oct 27, 2021) (Release Date: Oct 27, 2021)
  
Line 184: Line 377:
  
 Suitable for all Raspberry Pi 4 models and 3B+ as well. Aimed towards medium to expert Linux users as this release has no GUI. Suitable for all Raspberry Pi 4 models and 3B+ as well. Aimed towards medium to expert Linux users as this release has no GUI.
-Grab it from https://cloud.qortal.org/s/HzyASe4fJbLTQsm+Grab it from: Retired
  
 Countless changes under the hood. Its faster. Its better. Countless changes under the hood. Its faster. Its better.
Line 199: Line 392:
 This release is dedicated to my brother Jason, my moose Sean, my mate Russell and my good friend Gisele. This release is dedicated to my brother Jason, my moose Sean, my mate Russell and my good friend Gisele.
  
-====QortalOS NXT Beluga GNOME Desktop==== + 
 +==== QortalOS NXT Beluga GNOME Desktop ==== 
 (Release Date: Sep 10, 2021) (Release Date: Sep 10, 2021)
  
Line 205: Line 399:
  
 Suitable for 8GB Raspberry Pi. Suitable for 8GB Raspberry Pi.
-Grab it from https://cloud.qortal.org/s/6XFN2oe7nReCNZ3+Grab it from: Retired
  
 With GNOME Desktop Environment. With GNOME Desktop Environment.
Line 220: Line 414:
 This image is dedicated to whiteside5x for his support. Also known as Beluga.  This image is dedicated to whiteside5x for his support. Also known as Beluga. 
  
-====QortalOS NXT Vermouth LXQT Desktop==== + 
 +==== QortalOS NXT Vermouth LXQT Desktop ==== 
 (Release Date: Aug 27, 2021) (Release Date: Aug 27, 2021)
  
Line 226: Line 421:
  
 Suitable for both 4GB and 8GB Raspberry Pi variants. Suitable for both 4GB and 8GB Raspberry Pi variants.
-Grab it from https://cloud.qortal.org/s/QNNGyy98HKTeNBb+Grab it from: Retired
  
 With LXQT Desktop Environment. With LXQT Desktop Environment.
Line 234: Line 429:
 Built for plug and play use. Built for plug and play use.
  
-====QortalOS NXT Headless==== + 
 +==== QortalOS NXT Headless ==== 
 (Release Date: Aug 24, 2021) (Release Date: Aug 24, 2021)
  
Line 240: Line 436:
  
 For Advanced users without the Desktop environment For Advanced users without the Desktop environment
-Grab it from https://cloud.qortal.org/s/gzLtPGaRNBNeeJB+Grab it from: Retired
  
 This release brings more security features and networking performance improvements address the needs for data centre requirement excellent throughput on Qortal web hosting sync & relay. This release brings more security features and networking performance improvements address the needs for data centre requirement excellent throughput on Qortal web hosting sync & relay.
  
-Special thanks to Moose, Hfactor, CalDescent, Crowetic, Gisele,  Cat, Rylieh and Russell +Special thanks to Moose, Hfactor, Cal, Crowetic, Gisele,  Cat, Rylieh and Russell 
  
-====BrooklynR Jaymen Headless====+ 
 +==== BrooklynR Jaymen Headless ====
 (Release Date: July 14, 2021) (Release Date: July 14, 2021)
  
Line 252: Line 449:
  
 For Advanced users without the Desktop environment For Advanced users without the Desktop environment
-Grab it from https://cloud.qortal.org/s/2f86Zt5kBbwnco3+Grab it from: Retired
  
 Kernel 5.13.10 Kernel 5.13.10
Line 259: Line 456:
  
  
-====BrooklynR Plumbus Desktop==== +==== BrooklynR Plumbus Desktop ==== 
 (Release Date: July 3, 2021) (Release Date: July 3, 2021)
  
Line 265: Line 462:
  
 Suitable for both 4GB and 8GB Raspberry Pi variants. Suitable for both 4GB and 8GB Raspberry Pi variants.
-Grab it from : https://cloud.crowetic.com/s/9BPBQn92r2zz9nf+Grab it from: Retired
  
 The most responsive Desktop Environment yet. With MATE and LXDE integration The most responsive Desktop Environment yet. With MATE and LXDE integration
  
-====BrooklynR Jackwagon XFCE Desktop====+==== BrooklynR Jackwagon XFCE Desktop ====
 (Release Date: July 1, 2021) (Release Date: July 1, 2021)
  
Line 275: Line 472:
  
 Suitable for both 4GB and 8GB Raspberry Pi variants. Suitable for both 4GB and 8GB Raspberry Pi variants.
-Grab it from https://cloud.crowetic.com/s/7nJkZrEGJTjXW2K+Grab it from: Retired
  
 Qortal UI 1.4.2 pre-built inside Qortal UI 1.4.2 pre-built inside
Line 285: Line 482:
 .... too many other enhancements to add. .... too many other enhancements to add.
  
-====BrooklynR Russcade Edition====+ 
 +==== BrooklynR Russcade Edition ====
 (Release Date: June 16, 2021) (Release Date: June 16, 2021)
  
Line 307: Line 505:
 You will need SSH client to setup Qortal Core and UI and create a Putty/SSH tunnel. You will need SSH client to setup Qortal Core and UI and create a Putty/SSH tunnel.
  
-====BrooklynR Cinnamon Desktop====+ 
 +==== BrooklynR Cinnamon Desktop ====
 (Release Date: June 1, 2021) (Release Date: June 1, 2021)
  
Line 313: Line 512:
  
 Suitable for 8GB Raspberry Pi.  Suitable for 8GB Raspberry Pi. 
-Grab it from https://cloud.crowetic.com/s/HgnZt8KDATm8q35+Grab it from: Retired
  
-====BrooklynR Headless====+ 
 +==== BrooklynR Headless ====
 (Release Date: May 27, 2021) (Release Date: May 27, 2021)
  
Line 321: Line 521:
  
 Suitable for both 4GB and 8GB Raspberry Pi variants. Suitable for both 4GB and 8GB Raspberry Pi variants.
-Grab it from ( was replaced by Jaymen Headless July 14, 2021 see above)+Grab it from ( was replaced by Jaymen Headless July 14, 2021 see above): Retired
  
-====BrooklynR Plasma Desktop====+ 
 +==== BrooklynR Plasma Desktop ====
 (Release Date: May 27, 2021) (Release Date: May 27, 2021)
  
Line 329: Line 530:
  
 Suitable for 8GB Raspberry Pi. will run on 4GB Pi variants with a bit of lag. Suitable for 8GB Raspberry Pi. will run on 4GB Pi variants with a bit of lag.
-Grab it from https://cloud.crowetic.com/s/6Rq9DcSWfeeLwgG+Grab it from: Retired
  
 aka KDE - image with a perfect blend of beauty and performance.  aka KDE - image with a perfect blend of beauty and performance. 
 Recommended for 8GB Pi model with USB3 boot enabled Recommended for 8GB Pi model with USB3 boot enabled
  
-====BrooklynR XFCE Desktop====+ 
 +==== BrooklynR XFCE Desktop ====
 (Release Date: May 27, 2021) (Release Date: May 27, 2021)
  
Line 340: Line 542:
  
 Suitable for both 4GB and 8GB Raspberry Pi variants. Suitable for both 4GB and 8GB Raspberry Pi variants.
-Grab it from (was replaced by XFCE of July 12021 see above)+Grab it from: Retired 
 + 
 +===== BrooklynR Kernel Features =====  
 +  Previous version history: 
 +  - From  'Torchie' 64 bit release Kernel 6.0.11 for Qortal with mempow hard crunch handling. turbo boost enabled. do not OC torchie   
 +  - OS based on Debian LinuxRaspbian 10 buster 
 +  - Fully open source 
 +  - Customized specifically for Qortal 
 +  - Optimized performance and a must-have! 
 +  - Hardened Kernel security. No more local exploits 
 +  - Locked the memory copy b/w internal and external memory devices 
 +  - Added Entropy hardware for maxed out entropy. Far more than an i7 Processor 
 +  - Thermal control. Yes you can add fans and they will auto start when the temp hits 51C 
 +  - SPH implementation of crypto functions
raspberry_pi_4.1641330166.txt.gz · Last modified: 01/04/2022 16:02 by gisele_h