Differences

This shows you the differences between two versions of the page.

--- hardware_-_getting_started [08/26/2020 11:43] – gfactor
+++ hardware_-_getting_started [03/12/2021 04:51] (current) – removed gfactor
@@ Line 1: / Line 1: @@
-===== Getting Started=====
-This page describes the process of setting up your QORTector device.
-* Use an Ethernet cable to attach a modem or active data jack to the  Ethernet port on your Qort device. \\
-* Plug in the power adapter to power on the device. \\
-* Connect to the wireless network "qortal" with default password dmax911e. \\
-* In your web browser, navigate to http://172.24.1.1 \\
-{{ :qortal-portal.png?600 |}}
-* To access Qortal minting stage, SSH to portal IP address 172.24.1.1 as described on page [[hardware_-_service_access|Service Access]]
-If you do not wish to access Qort device via its Wifi network, you can obtain its WAN IP address from your modem or using a simple network scan utility. Please be advised not to assign it a public IP address without setting up firewall rules. Head over to [[hardware_-_firewall_rules|Netfilter Tutorial -  How To Secure Your QORT Router and Network Devices Connected To It]] to secure your device. \\
-//**Note:**// If you have an existing WiFi router then there is no issue of having two at the same time provided their channels or IP address don't conflict.

Qortal Project